1 Department of Heliophysics, Renewable Energy Sources and Electronics, Bukhara State University, 200117, M. Ikbol st., Bukhara, Uzbekistan.
2 Department of Physics, Bukhara State University, 200117, M. Ikbol st., Bukhara, Uzbekistan.
International Journal of Science and Research Archive, 2025 14(02), 1617-1625
Article DOI: 10.30574/ijsra.2025.14.2.0560
Received on 16 January 2025; revised on 22 February 2025; accepted on 25 February 2025
In this study, a computer model was developed in Comsol Multiphysics to determine and evaluate the temperature distribution in a panel-radiant heating system with a heated floor. A panel-radiant heating system consisting of a concrete layer with dimensions of 4 × 3.3 × 0.1 m³ was selected, and copper pipes with an inner diameter of 2 cm and total lengths of 64.84 m and 64.24 m were installed within this volume. Water was used as the heat carrier. The calculations revealed that in the second configuration, the temperature distribution on the surface of the panel-radiant heated floor system is relatively uniform and does not exceed the required value.
Panel-Radiant Heating System; Thermal Properties; Analytical Solution; Temperature Distribution; Thermal Resistance
Preview Article PDF
Jurabek Kamolov and Kamoliddin Samiev. Temperature distribution in a panel-radiant heating system. International Journal of Science and Research Archive, 2025 14(02), 1617-1625. Article DOI: https://doi.org/10.30574/ijsra.2025.14.2.0560.
Copyright © 2025 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0
